[x] Close ad

DISPLAY RESOLUTION

The display resolution of a digital television or computer display typically refers to the number of distinct pixels in each dimension that can be displayed. It can be an ambiguous term especially as the displayed resolution is controlled by different factors in picture-tube (CRT) and flat panel or projection displays using fixed picture-element (pixel) arrays.

One use of the term "Display resolution" applies to fixed-pixel-array displays such as flat-panel plasmas (PDPs), LCDs, front and rear projectors using LCD, DLP or similar technologies and is simply the physical number of columns and rows of pixels creating the display (eg, 852×480; 1366×768 etc). A consequence of having a fixed grid display is that for multiformat video inputs all displays need a "scaling-engine" (a digital video processor that includes a memory array) to match the incoming picture format to the display.

Some debators also use this term to indicate a range of input formats that the display's input electronics will accept and often include formats greater than the screen's native grid size even though they have to be down-scaled to match the screen's parameters- (eg. accepting a 1920×1080 input on a display with a native 1366×768 pixel array). In the case of television inputs, many manufacturers will take the input and zoom it out to "overscan" the display by as much as 5% so input resolution isn't necessarily display resolution.

The eye's perception of "display resolution" can be affected by a number of factors - see Image resolution and Optical resolution. One factor is the display screen's rectangular shape, which is expressed as the ratio of the physical picture width to the picture height. This is known as the aspect ratio. A screen's physical aspect ratio and the individual pixels' aspect ratio may not necessarily be the same. An array of 1280×720 on a 16:9 progressive scanned display has square pixels. An array of 1024×768 on a 16:9 progressive scan display has rectangular pixels.

An example of pixel shape affecting "resolution" or peceived sharpness: if you had 2 similar displays, both the same picture height and both having a 720×576 pixel array but one a 16:9 wide screen, the other a 4:3 screen and you displayed the same 720×576 4:3 picture on both, apart from the picture being stretched on the 16:9 display, the 4:3 screen will look the sharper.

While some CRT based displays may use digital video processing that involves image scaling using memory arrays ultimately "Display resolution" in CRT type displays are affected by different parameters such as spot size and focus, astigmatic effects in the display corners, the color phosphor pitch shadow mask or trinitron in color displays and the video bandwidth.

Applying mainly to CRT displays the way the lines or rows are displayed will also affect the perceived resolution in the vertical direction. This relates to the differences produced by interlace or progressive scanning and now by the use of memory to hold each pixel's displayed brightness values between picture refreshes.

Contents

[edit] Overview

Analog television systems use interlace scanning with two sequential scans (50 or 60 fields per second), one with the odd numbered lines, the other with the even numbered lines to give a complete picture (25 or 30 frames per second). This is done to save transmission bandwidth but a consequence is that in picture tube (CRT) displays, the full vertical resolution cannot be realized. For example, the maximum detail in the vertical direction would be for adjacent lines to be alternately black then white. This is not a problem in a progressive display but an interlace display will have an unacceptable flicker or twitter at the slower frame rate. This is why interlace is unacceptable for fine detail such as computer word processing or spreadsheets. For television it means that if the picture is intended for interlace displays the picture must be vertically filtered to remove this objectionable flicker with a reduction of vertical resolution to about 70%. So a 576 line PAL interlace display only has about 400 lines vertical resolution and 350 in the case of a 480 line NTSC interlace display. Similarly, 1080i HD interlaced video would need to be filtered to about 700 lines for an interlaced display. Any interlaced broadcast television pictures and for that matter DVDs are filtered to that vertical resolution to reduce the interline twitter on fine detail.

Fixed pixel array displays such as LCDs, plasmas, DLPs, LCoS, etc. need a "scaling" processor with frame memory, which depending on the processing system, effectively converts an incoming interlaced picture into progressive. A similar process occurs in a PC and its display with interlaced video (eg. from a TV tuner card). The downside is that interlace motion artifacts are almost impossible to remove resulting in horizontal "toothed" edges on moving objects.

Also in analog connected picture displays such as CRT TV sets, the horizontal scanlines are not divided into pixels, and therefore the horizontal resolution is related to the bandwidth of the luminance and chroma signals. For television, the analog bandwidth for luminance in standard definition should be flat to 5 MHz and in high definition, about 30/31 MHz.

[edit] Current standards in resolution

Currently 1024×768 (XGA/XVGA, eXtended), 1280×1024 (SXGA Super eXtended Graphics Array), and 1600×1200 resolution (UXGA, Ultra-eXtended) are the most common display resolutions. Many computer users including CAD users, graphic artists and video game players run their computers at 1600×1200 resolution (UXGA, Ultra-eXtended) or higher if they have the necessary equipment - although 1280×1024 (SXGA Super eXtended Graphics Array) is more widespread as it is the optimum resolution of most 19" monitors. When a computer display resolution is set higher than the physical screen resolution, some systems make the virtual screen scrollable over the physical screen, however, most CRT monitors will accept higher resolutions than their native resolution without scrolling. The true maximum resolution is calculated from the dot pitch. Few CRT manufacturers will quote the true native resolution in their documentation, but most LCD manufacturers do. With digital television and HDTV, vertical resolutions of 720 or 1080 scan lines are typical.

[edit] Overscan

Most television display manufacturers "overscan" the pictures on their displays (CRTs and PDPs, LCDs etc.), so that the effective on-screen picture may be reduced from 720×576(480) to 680×550(450), for example. The size of the invisible area somewhat depends on the display device. Computer displays including projectors generally do not overscan although many models (particularly CRT displays) allow it.

[edit] Evolution of resolution standards

Many personal computers introduced in the late 1970s and the 1980s were designed to use television sets as their display devices, making the resolutions dependent on the television standards in use, including PAL and NTSC. Picture sizes were usually limited in order to ensure the visibility of all the pixels in the major television standards and the broad range of television sets with varying amounts of overscan. The actual drawable picture area was therefore somewhat smaller than the whole screen, and was usually surrounded by a static-colored border. Also, the interlace scanning was usually omitted in order to provide more stability to the picture, effectively halving the vertical resolution in progress. 320×200 and 640×200 on NTSC and 320×256 and 640×256 on PAL were relatively common resolutions in the era. In the PC world, these resolutions came to be used by the Color Graphics Adapter.

The 640×480 resolution, introduced with the IBM PS/2 VGA and MCGA (multi-color) on-board graphics chips, was the standard resolution in the IBM PC compatibles from 1990 to around 1996, partly due to its 4:3 ratio. 800×600 was the standard resolution until around 2000. Since then, 1024×768 has been the standard resolution. Many web sites and multimedia products are designed for this resolution. Most of today's computer games released during the "128-bit video game era", such as SimCity 4, do not support 640×480 at all. Microsoft Windows XP is designed to run at 800×600 minimum although it is possible to select 640×480 in the Advanced Settings Window, and an application is also able to switch to any desired mode. GNU/Linux, FreeBSD, and most Unix variants use the X Window System and can run at any desired resolution as long as the display and video card support it. Apple's Mac OS and Mac OS X operating systems are able to run with most available display resolutions; although it is possible to select 640×480 resolution, 800×600 is Apple's recommended minimum. Apple does have a tendency to use non-standard resolutions and aspect ratios with their computers; see an extended list of display resolutions in their product line.

[edit] Common display resolutions

[edit] Computer graphics

Computer Standard Resolution Display Aspect Ratio Pixels
VIC-II multicolor, IBM PCjr 16-color 160×200 4:5 32,000
TMS9918, ZX Spectrum 256×192 4:3 49,152
Apple II 280×192 35:24 53,760
CGA 4-color, Atari ST 16 color, VIC-II HiRes, Amiga OCS NTSC LowRes 320×200 16:10 64,000
QVGA 320×240 4:3 76,800
Acorn BBC 40 column modes 320×256 5:4 76,800
Amiga OCS PAL LowRes 320×256 5:4 76,800
WQVGA 432×240 18:10 103,680
HVGA 480×320 3:2 153,200
Black & white Macintosh (9") 512×342 3:2 175,104
Macintosh LC (12")/Color Classic 512×384 4:3 196,608
Atari ST 4 color, CGA mono, Amiga OCS NTSC HiRes 640×200 16:5 128,000
Acorn BBC 80 column modes 640×256 5:4 163,840
Amiga OCS PAL HiRes 640×256 5:2 163,840
EGA 640×350 64:35 (approx. 9:5) 224,000
Atari ST mono, Amiga OCS NTSC interlaced 640×400 16:10 256,000
VGA and MCGA 640×480 4:3 307,200
Amiga OCS PAL interlaced 640×512 5:4 327,680
HGC 720×348 60:29 (approx. 2:1) 250,560
MDA 720×350 72:35 (approx. 2:1) 252,000
Apple Lisa 720×360 2:1 259,200
WGA or WVGA 800×480 5:3 384,000
SVGA 800×600 4:3 480,000
XGA 1024×768 4:3 786,432
NeXTcube 1120×832 35:26 (approx. 4:3) 931,840
XGA+ 1152×864 4:3 995,328
Sun 1152×900 32:25 (approx. 4:3) 1,036,800
SXGA 1280×1024 5:4 1,310,720
WXGA1 1280×800 16:10 1,024,000
WXGA2 1366×768 16:9 1,049,088
WSXGA or WXGA+ 1440×900 16:10 1,296,000
SXGA+ 1400×1050 4:3 1,470,000
WSXGA 1600×1024 25:16 1,638,400
WSXGA+ 1680×1050 16:10 1,764,000
UXGA 1600×1200 4:3 1,920,000
WUXGA 1920×1200 16:10 2,304,000
QXGA 2048×1536 4:3 3,145,728
WQXGA 2560×1600 16:10 4,096,000
QSXGA 2560×2048 5:4 5,242,880
QSXGA+ 2800×2100 4:3 5,880,000
WQSXGA 3200×2048 25:16 6,553,600
QUXGA 3200×2400 4:3 7,680,000
WQUXGA 3840×2400 16:10 9,216,000
HSXGA 5120×4096 5:4 20,971,520
WHSXGA 6400×4096 25:16 26,214,400
HUXGA 6400×4800 4:3 30,720,000
WHUXGA 7680×4800 16:10 36,864,000

Note 1: WXGA defines a range of resolutions with widths of 1280 to 1366 pixels and heights of 720 to 800 pixels.

[edit] Television/movies

Analog TV standard Resolution Display aspect ratio Pixels
PAL, SECAM ~350 × 576 lines 4:3 ~201,600
PalPlus ~350 × 576 lines 16:9 ~201,600
Undecoded PalPlus ~350 × 432 lines 16:9 ~151,200
NTSC ~270 × 480 lines 4:3 ~129,600
Laserdisc ~560 × 480 (NTSC) 4:3 ~268,800
~560 × 576 (PAL/SECAM) ~322,560
Betamax ~250(285 With SuperBeta) × 480 (NTSC) 4:3 ~120,000 (~136,800)
~250(285 With SuperBeta) × 576 (PAL/SECAM) ~144,000 (~164,160)
VHS ~240 × 480 (NTSC) 4:3 ~115,200
~240 × 576 (PAL/SECAM) ~138,240
S-VHS ~400 × 480 (NTSC) 4:3 ~192,000
~400 × 576 (PAL/SECAM) ~230,400

~ = horizontal resolution is an approximation

Digital TV standard Resolution Display aspect ratio Pixels
Video CD 352 × 240 (NTSC) 4:3 (non-square pixels) 84,480
352 × 288 (PAL) 101,376
China Video Disc 352 × 480 (NTSC) 4:3 (non-square pixels) 168,960
352 × 576 (PAL) 202,725
SVCD 480 × 480 (NTSC) 4:3 (non-square pixels) 230,400
480 × 576 (PAL) 276,480
EDTV 480p 640 × 480 4:3 or 16:9 307,200
704 × 480 337,920
852 × 480 408,960
DVD 720 × 480 (NTSC) 4:3 or 16:9 (non-square pixels) 345,600
720 × 576 (PAL) 414,720
HDTV 720p 1280 × 720 16:9 921,600
HDTV 1080p, 1080i 1920 × 1080 16:9 2,073,600
HD DVD 720p, 1080p, 1080i 1920 × 1080 16:9 2,073,600
Blu-ray 720p, 1080p, 1080i 1920 × 1080 16:9 2,073,600
Digital film standard Resolution Display aspect ratio Pixels
Academy 4K 3656 × 2664 1.37:1 9,739,584
Digital cinema 4K 4096 × 1714 2.39:1 7,020,544
3996 × 2160 1.85:1 8,631,360
Academy 2K 1828 × 1332 1.37:1 2,434,896
Digital Cinema 2K 2048 × 858 2.39:1 1,757,184
1998 × 1080 1.85:1 2,157,840
Digital video resolutions
Designation Usage examples Definition (lines) Rate (Hz)
Interlaced (fields) Progressive (frames)
Low; MP@LL LDTV, VCD 240; 288 (SIF) 24, 30; 25
Standard; MP@ML SDTV, SVCD, DVD, DV 480 (NTSC, PAL-M) 60 24, 30
576 (PAL, SECAM) 50 25
Enhanced EDTV 480; 576 60; 50
High; MP@HL HDTV, HD DVD, Blu-ray Disc, HDV 720 24, 30, 60; 25, 50
1080 50, 60 24, 30; 25
Visual comparison of common video/TV display resolutions
This table illustrates total horizontal and vertical pixel resolution via box size. It does not accurately reflect the screen shape (aspect ratio) of these formats, which is either 4:3 or 16:9.

[edit] See also

[edit] External links